How to control a mold outbreak

With all the flooding from storms and extreme rainfall levels, millions of people are seeking advice on cleaning up mold. To prevent mold from growing and spreading after a flood, you have to act fast—within 24 to 48 hours. Here’s what the Centers for Disease Control (CDC) recommends:

• Clean up and dry out the home area quickly. Open doors and windows and use fans or dehumidifiers to dry out the home space.

• Remove all porous items that have been wet for more than 48 hours and that cannot be thoroughly cleaned and dried. These items can remain a source of mold growth and should be removed from the home.

• Porous, non-cleanable items include carpeting and carpet padding, upholstery, wallpaper, drywall, ceiling tiles, insulation material, some clothing, leather, paper, some wood and wood products, and food. Removal and cleaning are important because even dead mold can cause allergic reactions.

• Clean wet items and surfaces with detergent and water to prevent mold growth.

• Temporarily store damaged or discarded items outside the home until insurance claims can be processed.

Using chlorine or not

In recent years, there has been some conflicting advice over whether or not homeowners should use chlorine to clean up mold outbreaks. Like the CDC, the Environmental Protection Agency recommends using just water and detergent to attack mold, but doesn’t rule out the use of bleach or other biocides for larger problems.

However, the Occupational Safety and Health Administration recommends using a mixture of 1/2 cup of bleach mixed into a gallon of water for mold that’s caused by floodwaters. Never mix bleach or bleach-containing products with ammonia or ammonia-containing products.

“Because floodwaters are likely to be contaminated with human and animal waste, OSHA recommends the use of bleach, but only in situations where there is a light covering of mold, and only after the area is cleaned with soap and water,” says OSHA spokesman Richard DeAngelis.

If you have only a minor outbreak in a very small area, you can use a stiff brush, a non-ammonia detergent, and hot water to scrub mold off non-porous surfaces. Use a stiff-bristle toothbrush to get between edges or tiles. You can also use a paste of baking soda and water. And remember to wear gloves and a protective mask, since mold spores can be inhaled.

If you think a serious mold problem is developing, consult a professional mold remediation service. You need to find the source of the moisture and deal with that, otherwise the mold will just return. You should also consult an expert if people who live in your home have health issues or weakened immune systems.

Cleaning mold from heating or air conditioning units

If the floodwaters have affected your heating and air conditioning you’ll need help from a qualified professional, says the CDC. All surfaces of an HVAC system and all its components that were submerged during a flood are potential reservoirs for dirt, debris, and microorganisms, including bacteria and mold.

In addition, moisture can collect in areas of HVAC system components that were not submerged (e.g., air supply ducts above the water line), and this also can lead to the growth of microorganisms. That’s why all components of the HVAC system should be thoroughly inspected, cleaned of dirt and debris, and disinfected by a professional.

Amelia Evans
Amelia is a member of the content team at The Long Reach and works for a variety of multinational brands as well as a freelance journalist. She is a health and lifestyle author who specializes in whole-body wellbeing and is very knowledgeable about the music industry. Amelia enjoys going into the countryside for some relaxation while she’s not researching or writing.